Transfer Case Output Shaft Seal

Part Number: 33142-01J10
Supersession(s): 33142-01J01; 3314201J10; 33220-20J00

  • Seals the connection between the transfer case and the transmissions input shaft
  • Can wear out over time and cause fluid leaks
  • Replace if you have difficulty shifting, there's a grinding noise under the vehicle, or there are issues with four-wheel drive

Your Transfer Case Output Shaft Seal can be found on the transfer case on your four-wheel INFINITI. The transfer case's job is to send power to the rear wheels on your four-wheel-drive model using gear reductions and chain drives.

The transfer case output shaft is the part that connects your axle to the transfer case with the transmission's input shaft and uses the Transfer Case Output Shaft Seal to make sure that the parts maintain a tight connection. Without the Transfer Case Output Shaft Seal, transmission fluid would leak from the rear and front output shaft.

If a worn out or damaged Transfer Case Output Shaft Seal is causing the shaft to leak, the low fluid level can no longer properly lubricate the internal parts of the transfer case, which can damage the gears and chain drives by causing them to overheat or wear out. These damaged internal parts can cause the entire transfer case to wear out rather quickly and become inoperable, potentially leaving the vehicle without four-wheel drive operation.

If your Transfer Case Output Shaft Seal is old, damaged, or wearing out, you might notice a few symptoms. These indicators can include trouble with your INFINITI remaining in four-wheel drive, a metal-on-metal grinding noise underneath the vehicle, and issues shifting gears.

If you suspect your Transfer Case Output Shaft Seal is wearing out, replace it as soon as possible to avoid additional damage to the transfer case and other nearby parts.

Replace your INFINITI's Transfer Case Output Shaft Seal with a new seal from genuine INFINITI Parts. This Transfer Case Output Shaft Seal 3314201J10 fits your INFINITI EX35 2008-2017, INFINITI FX45 2003-2008, INFINITI Q40 2014-2015, INFINITI FX35 2003-2012, INFINITI G37 2009-2013, INFINITI Q50 2014-2020, INFINITI FX37 2013-2013, INFINITI M56 2011-2019, INFINITI G35 2004-2008, INFINITI G37X 2009-2013, INFINITI G25 2011-2013, INFINITI Q70 2011-2019, INFINITI Q60 2014-2021, INFINITI QX70 2014-2017, INFINITI FX50 2009-2013, INFINITI M37 2011-2019, INFINITI M35 2006-2010, INFINITI M45 2006-2010, or INFINITI EX37 2013-2017. Click on the What This Fits tab for more information.



SEAL-OIL,TRANSFER CASE

Fits EX35 (2008 - 2012)

19 people have looked at this part recently
Diagram TRANSFER CASE for your INFINITI EX35
#33114
Required: 1
ALL WHEEL DRIVE. VQ35HR ENGINE TYPE ENGIEN<200710 - 201009>
ALL WHEEL DRIVE. VQ35HR ENGINE TYPE ENGIEN<201009 - 201207>
ALL WHEEL DRIVE. VQ37VHR ENGINE<201207 - 201212>
ALL WHEEL DRIVE. VQ37VHR ENGINE<201212 - 201507>
ALL WHEEL DRIVE. VQ37VHR ENGINE<201507 - >
2008 - 2011
- ALL WHEEL DRIVE. VQ35HR ENGINE TYPE ENGIEN

2011 - 2013
- ALL WHEEL DRIVE. VQ35HR ENGINE TYPE ENGIEN

2013 - 2016
- ALL WHEEL DRIVE. VQ37VHR ENGINE

2016 - 2017
- ALL WHEEL DRIVE. VQ37VHR ENGINE

Policies & Information

Manufacturer Warranty