Transfer Case Output Shaft Seal

Part Number: 33114-AD300
Supersession(s): 33114AD300

  • Seals the connection between the transfer case and the transmissions input shaft
  • Can wear out over time and cause fluid leaks
  • Replace if you have difficulty shifting, there's a grinding noise under the vehicle, or there are issues with four-wheel drive

The Transfer Case Output Shaft Seal is found on the transfer case of your INFINITI QX60 2013-2013 or INFINITI JX35 2013-2013. The transfer case's job is to send power to the rear wheels on your four-wheel-drive model using gear reductions and chain drives.

The transfer case output shaft on your vehicle joins the transfer case to the axle with the transmission's input shaft and uses the Transfer Case Output Shaft Seal to make sure that the parts maintain a tight connection. Without a functioning Transfer Case Output Shaft Seal, transmission fluid would leak from the rear and front output shaft.

If there's a leak caused by a broken, damaged, or worn out Transfer Case Output Shaft Seal, the lack of fluid will no longer lubricate the internal transfer case components, which can damage the gears and chain drives by causing them to overheat or wear out. These damaged internal parts can cause the entire transfer case to become damaged and even inoperable, potentially leaving the vehicle without four-wheel drive operation.

If the Transfer Case Output Shaft Seal on your vehicle is wearing out or currently damaged, you may notice a few symptoms. Some of these symptoms may include trouble with your INFINITI remaining in four-wheel drive, a metal-on-metal grinding noise underneath the vehicle, and issues shifting gears.

If you think the Transfer Case Output Shaft Seal on your vehicle is wearing out, replace it with a new part as soon as possible to keep the transfer case and other nearby parts from becoming damaged as well.

Replace your INFINITI's Transfer Case Output Shaft Seal with a genuine replacement part from INFINITI Parts. This Transfer Case Output Shaft Seal 33114AD300 fits your INFINITI QX60 2013-2013 or INFINITI JX35 2013-2013. Check the What This Fits tab for more information.



SEAL-OIL,DRIVE PINION

Fits JX35, QX60

26 people have looked at this part recently
Diagram TRANSFER CASE for your 2008 INFINITI Q60
#33114Q
Required: 1
ALL WHEEL DRIVE. VQ35DD<201608 ->
ALL WHEEL DRIVE. VQ35DE<201202 - 201306>
ALL WHEEL DRIVE. VQ35DE<201306 - 201409>
ALL WHEEL DRIVE. VQ35DE<201409 - 201601>
ALL WHEEL DRIVE. VQ35DE<201601 - 201608>
ALL WHEEL DRIVE. VQ35DE. CVT/FK FROM 0113<201301 - 201306 >
2013 - 2013
- ALL WHEEL DRIVE. VQ35DE

Policies & Information

Manufacturer Warranty