Molding (RR) Door. MOULDING Door Outside.
Door Belt Molding.

• Runs along the bottom of your door window
• Helps keep moisture, dirt, and debris from entering the cabin
• Replace when brittle or cracked

The Door Belt Molding (Left, Rear) on your INFINITI is a strip of trim spanning the bottom length of the door window that keeps things like water, debris, and dirt from getting inside the door. The Door Belt Molding (Left, Rear) is usually made of either plastic, chrome, or rubber. Without a functioning Door Belt Molding (Left, Rear), water may leak inside the door panel, which can cause further damage to your INFINITI. Make sure your old, damaged, or missing Door Belt Molding (Left, Rear) is replaced with a genuine Door Belt Molding (Left, Rear) from INFINITI Parts.

After years of use, a Door Belt Molding (Left, Rear) may become brittle or worn and crack. Exposure to harsh elements like UV rays, road salt, snow and ice, and even hard rainfall could all potentially damage your Door Belt Molding (Left, Rear).

Is it time to replace the Door Belt Molding (Left, Rear) on your INFINITI? Visually inspect your current molding to see. There may be cracks on the trim's edges or the molding may look discolored or feel hard. Try rolling the windows down and up to check for unusual squeaking, chattering, or squealing sounds. These sounds can occur when the trim is worn or damaged and rubbing against the window.

When replacing your vehicle's Door Belt Molding (Left, Rear), you first have to remove the old molding. Do this by rolling the window all the way down and carefully removing the interior door panel. Once you've removed the panel, carefully pry the old molding up and away from the vehicle. Your INFINITI's Door Belt Molding (Left, Rear) may be held on using metal clips. If this is the case, you'll likely need a special tool to unhook the clips without damaging other components of the vehicle. With the old molding removed, firmly push the new Door Belt Molding (Left, Rear) in place and make sure that the window is able to roll all the way up and down. With the new molding properly installed, replace the inner door panel. Visit your nearest authorized INFINITI service center for professional help.

Does the Door Belt Molding (Left, Rear) on your INFINITI need to be replaced? Purchase from INFINITI Parts for new, genuine Door Belt Molding (Left, Rear). Genuine Door Belt Molding (Left, Rear) is custom designed, fitted, and tested for durability for your INFINITI model.

This Body, Interior and Trim Door Belt Molding (Left, Rear), 82821JK00E fits your INFINITI G25, INFINITI G35, INFINITI G37, INFINITI G37X, or INFINITI Q40. See the What This Fits tab for more information.

Fits G25, G35, G37, G37X, Q40