Protector FR.
Fender Splash Shield.

• Located between the fender and the tire
• Helps shield your vehicle from small rocks and other road debris
• Replace when cracked or broken

Your INFINITI fender's job is to provide protection for your undercarriage and wheels from debris on the roadway, protect pedestrians and other vehicles from any rocks that may bounce off your spinning tires, and protect your vehicle's frame if you're involved in a minor collision.

For some INFINITI models, the fender is made up of multiple components, and one of those is the Fender Splash Shield (Left, Front). Very often, the INFINITI fender splash shield can be found to the inside of the wheel well, and is situated in between the fender frame and your tire. Fender splash shields are made-to-fit to fit only in certain locations on your INFINITI: passenger-side front, passenger-side rear, driver-side front, or driver-side rear. These shields are also made using the exact dimensions of particular INFINITI models and years.

Because of where they're mounted on your vehicle, your Fender Splash Shield (Left, Front) is your first layer of protection against incoming debris and contamination. As an example, if a truck speeds beside your INFINITI and its large tires throw a pebble right into your vehicle's wheel well, your Fender Splash Shield (Left, Front) helps prevent the object from getting stuck in the headlight assembly, braking system, or undercarriage of your INFINITI. Additionally, the Fender Splash Shield (Left, Front) may help protect these parts from weather, which can help delay wear and tear.

As it ages and endures exposure to road salts, rain, ice, and heat, your INFINITI Fender Splash Shield (Left, Front) may become worn, which negatively affects the level of protection it can give to your vehicle's undercarriage components. Plus, it can break or detach if you scrape a curb or drive through a pothole. If it's broken, your Fender Splash Shield (Left, Front) can leave part of your vehicle vulnerable to debris, and it will probably make a scraping or flapping noise if it is left to flutter against the nearby tire.

The good news: replacing one of the fender splash shields on your INFINITI is affordable and easy to handle. You need a Fender Splash Shield (Left, Front) that will fit on your INFINITI seamlessly, so it's a good idea to buy directly from INFINITI Parts. Depending on your vehicle model and year, the replacement process may be slightly different. Most of the time, you'll just need to have a screwdriver, fasteners, and your INFINITI owner's manual.

Before you do anything else, start by allowing your car to cool down for several minutes. Next, remove the bolts and clips that hold the old fender shield. If you're planning to reuse the fasteners, set them aside for a few minutes (typically, it's advisable to use new fasteners, in case the existing hardware is worn). Test the fitment of your Fender Splash Shield (Left, Front) replacement by setting it in place, checking to be sure that all rivets and holes are aligned with with the ones in your fender. Once everything is aligned, screw or clip the Fender Splash Shield (Left, Front) into place and secure it! For professional installation, stop by your nearest INFINITI service site or dealership.

With a little bit of time and a made-to-fit Fender Splash Shield (Left, Front), you and your INFINITI can get back to your adventures with peace of mind! Order genuine INFINITI fender splash shields and automotive accessories for your vehicle now. This part will fit your INFINITI G25, INFINITI G35, INFINITI G37, INFINITI G37X, or INFINITI Q40. Click on the What This Fits section for additional details.

Fits G25, G35, G37, G37X, Q40