Protector FR.
Fender Splash Shield.

• Located between the fender and the tire
• Helps shield your vehicle from small rocks and other road debris
• Replace when cracked or broken

The fender on your INFINITI is designed to provide protection for your undercarriage and wheels from incoming road debris, protect nearby people or other cars from small pebbles that might deflect from your tires, and minimize damage to your vehicle in case of a collision or "fender bender."

For some INFINITI models, the fender has several distinct parts, including a Fender Splash Shield (Right, Front). Specifically, the fender splash shield on your INFINITI is mounted to the inside of the wheel well, and sits in between the fender frame and your tire. Fender splash shields are custom designed for specific fitment within your INFINITI: driver-side front, driver-side rear, passenger-side front, or passenger-side rear. These shields are also engineered with respect to the measurements of particular INFINITI models and years.

Because of where they're mounted within your wheel well, the Fender Splash Shield (Right, Front) serves as the outermost layer of defense from flying rocks or debris. For instance, if a truck drives past your vehicle and its tires send a rock straight toward your wheel well, the Fender Splash Shield (Right, Front) can help prevent the object from bouncing into the brakes, headlight or tail light assemblies, or undercarriage. And, this shield can help protect these parts from weather, which can help slow wear and tear.

With time and exposure to road salts, rain, ice, and heat, your INFINITI Fender Splash Shield (Right, Front) can break down, which negatively affects its ability to protect your vehicle's complex systems. Additionally, it may have cracks or chips if you accidentally hit a curb or drive through a pothole. When broken, your Fender Splash Shield (Right, Front) can leave part of your vehicle vulnerable to debris, and it could also create an annoying grinding or tapping sound if a piece breaks off and flutters against the tires.

But, the good news is that replacing any of the fender splash shields on your INFINITI is affordable and easy to handle. You want a new Fender Splash Shield (Right, Front) that will fit on your INFINITI perfectly, so it's a good idea to purchase an authentic part from INFINITI Parts. Depending on your vehicle model and year, the steps for installation may vary slightly. In most cases, you'll just need to have your INFINITI owner's manual, a screwdriver, and some fasteners.

Before you do anything else, start by allowing your car to cool down for several minutes. Then, remove the bolts and clips that are attached to your current fender shield. If you're planning to reuse the fasteners, set them aside for a few minutes (usually, it's best to purchase new fasteners, in case your old hardware has been damaged). Dry fit the new Fender Splash Shield (Right, Front) by holding it in the appropriate position, ensuring any rivets and holes match with the ones in your fender. After you've aligned everything, snap or screw the Fender Splash Shield (Right, Front) into place and secure it! For professional installation, visit your nearest INFINITI service site or dealership.

With a few tools and an authentic Fender Splash Shield (Right, Front) in your corner, your beloved INFINITI can hit the road again in no time! Purchase your INFINITI fender splash shields and other Body, Interior and Trim parts for your INFINITI G25, INFINITI G35, INFINITI G37, INFINITI G37X, or INFINITI Q40 today. Check out the What This Fits section for more info.

Fits G25, G35, G37, G37X, Q40