Local Pick-Up Only.
Protector FR.
Fender Splash Shield.

• Located between the fender and the tire
• Helps shield your vehicle from small rocks and other road debris
• Replace when cracked or broken

The fender on your INFINITI is designed to help protect the wheels and undercarriage components from debris on the roadway, protect pedestrians and other cars from any rocks that may bounce off your tires, and protect your vehicle's frame in case of a collision or "fender bender."

On quite a few INFINITI models, the fender has several distinct parts, and one of those is the Fender Splash Shield (Right, Front). Specifically, the fender splash shield on your INFINITI can be found to the inside of the wheel well, and sits in between the fender frame and your tire. All fender splash shields are tailor-made to fit only in certain locations on your car: passenger-side front, driver-side front, passenger-side rear, and driver-side rear. They're also designed using the exact dimensions of particular years and models of INFINITI vehicles.

Because of where they're mounted on your vehicle, the Fender Splash Shield (Right, Front) serves as your first layer of protection from flying rocks or debris. For instance, if a truck speeds past your vehicle and its tires send a rock straight toward your wheel well, your trusty Fender Splash Shield (Right, Front) can stop the rock from bouncing into the undercarriage, brake system, or headlight assembly. And, this shield can offer protection for those parts from outside elements, which can help delay damage or corrosion.

Over time, when exposed to moisture, rain, ice, and road salt, your INFINITI Fender Splash Shield (Right, Front) may become worn, losing its ability to protect the undercarriage of your vehicle. Keep in mind, it may also break or detach if you hit a curb by accident or smash into a sizable pothole. A broken Fender Splash Shield (Right, Front) can leave part of your vehicle vulnerable to debris, and it could also generate a grinding or tapping sound if a broken piece is pushed against the nearby tire.

The good news: installing a replacement for your vehicle's fender splash shields is inexpensive and simple to do. You need a Fender Splash Shield (Right, Front) that attaches to your INFINITI without any gaps, so it's recommended that you buy directly from INFINITI Parts. Depending on your specific vehicle, the replacement process can vary a bit. Most of the time, all you need is the correct fasteners, a screwdriver, and your vehicle owner's manual.

Before you do anything else, start by letting your car cool down. Next, remove the clips and bolts from the old fender shield. If you'll be reusing the same ones, set them aside for a few minutes (typically, it's advisable to use new ones, just in case the old components are worn out). Dry fit the new Fender Splash Shield (Right, Front) by holding it in the appropriate position, checking to be sure that all holes and rivets line up with the ones in your fender. Once you're confident about the placement, snap or screw your new Fender Splash Shield (Right, Front) into place! For help with this process, head to a local INFINITI service site or dealership.

With a little bit of time and a made-to-fit Fender Splash Shield (Right, Front), your INFINITI can be back up to speed in no time! Order genuine INFINITI fender splash shields and automotive accessories for your vehicle now. This part will fit your INFINITI QX50. See the What This Fits link for more info.

Fits QX50, QX55