Protector Fender.
Fender Splash Shield.

• Located between the fender and the tire
• Helps shield your vehicle from small rocks and other road debris
• Replace when cracked or broken

On your INFINITI, the fender can help protect your undercarriage and wheels from flying debris, shield nearby people or other vehicles from any rocks that might deflect from your moving tires, and minimize damage to your vehicle in case of a minor collision.

In many INFINITI models, the fender has multiple components, and one of those is the Fender Splash Shield (Left, Front). Specifically, the INFINITI fender splash shield is mounted to the wheel well, and is situated between your tire and the rest of the fender. Fender splash shields are custom designed for specific fitment within your car: passenger-side front, passenger-side rear, driver-side front, or driver-side rear. These shields are also made for use in specific INFINITI years and models.

With their carefully chosen position on your vehicle, the Fender Splash Shield (Left, Front) can be the first line of defense against damage from debris. For example, if a truck drives past your vehicle and kicks a rock up straight toward your wheel well, your Fender Splash Shield (Left, Front) helps prevent the debris from affecting the brakes, headlight or tail light assemblies, or undercarriage. Additionally, the shield can help protect these parts from outside elements, helping slow corrosion and wear.

Over time, when exposed to road salts, rain, ice, and heat, your INFINITI Fender Splash Shield (Left, Front) can break down, which compromises its ability to protect your vehicle's undercarriage components. Keep in mind, it may also break or detach if you accidentally hit a curb or drive over a pothole. If it's broken, your Fender Splash Shield (Left, Front) exposes your vehicle to dangerous debris, and it could also create an annoying grinding or tapping sound if a piece breaks off and flutters against the tires.

Here's the thing, though: replacing one of your INFINITI's fender splash shields is affordable and easy to handle. You want a new Fender Splash Shield (Left, Front) that fits your INFINITI without any gaps, so it's wise to purchase an authentic part from INFINITI Parts. Depending on your specific vehicle, the process of installing your new part may vary slightly. For most vehicles, you'll just need to have your INFINITI owner's manual, a screwdriver, and some fasteners.

You'll start by giving your car a few minutes to cool. Then, take off the bolts and clips that hold your current fender shield. If you're planning to reuse the fasteners, stash them in a safe place until you need them again (whenever possible, it's best to purchase new ones, just in case the old components are worn out). Dry fit the new Fender Splash Shield (Left, Front) by holding it in the appropriate position, ensuring any holes and rivets line up with the ones in your fender. Once everything is aligned, screw or clip your new Fender Splash Shield (Left, Front) into place! If you need help, stop by a nearby INFINITI service center.

With a little bit of time and an authentic Fender Splash Shield (Left, Front) in your corner, your INFINITI can be back up to speed with peace of mind! Purchase your INFINITI fender splash shields and automotive accessories for your vehicle now. This part will fit your INFINITI M37, INFINITI M56, or INFINITI Q70. Check out the What This Fits tab for additional details.

Fits M56 (2010 - 2019)