Baffle FR. Baffle Plate Fender.
Fender Splash Shield.

• Located between the fender and the tire
• Helps shield your vehicle from small rocks and other road debris
• Replace when cracked or broken

On your INFINITI, the fender can help in safeguarding your wheels and undercarriage from incoming road debris, shield nearby people or vehicles from rocks and pebbles that may ricochet off your tires, and minimize damage to your vehicle in case of a minor collision.

For some INFINITI models, the fender consists of a few separate parts, and one of those is the Fender Splash Shield (Left, Front). To get more specific, the INFINITI fender splash shield is mounted inside the wheel well, and is situated between the fender and the tire. All fender splash shields are tailor-made for a particular location on your INFINITI: passenger-side front, passenger-side rear, driver-side front, or driver-side rear. These shields are also designed with respect to the measurements of specific INFINITI years and models.

With their carefully chosen position on your vehicle, your Fender Splash Shield (Left, Front) is your first line of defense against damage from debris. For example, if a truck speeds past your vehicle and its tires send a rock straight toward your wheel well, your trusty Fender Splash Shield (Left, Front) helps prevent the rock from getting stuck in the undercarriage, brake system, or headlight assembly. Plus, this shield can offer protection for those parts from outside elements, which could prevent premature corrosion and wear.

As it ages and endures exposure to moisture, rain, ice, and road salt, your INFINITI Fender Splash Shield (Left, Front) may become worn, which compromises the protection it offers to the undercarriage of your vehicle. Keep in mind, it may also break or detach if you hit a curb by accident or drive over a sizable pothole. When broken, your Fender Splash Shield (Left, Front) exposes your vehicle to dangerous debris, and it could also create an annoying flapping or grinding noise if a broken piece is pushed up against a tire.

Here's the thing, though: installing a replacement for your INFINITI's fender splash shields is easy and inexpensive. You want a new Fender Splash Shield (Left, Front) that will fit on your INFINITI seamlessly, so it's recommended that you order a genuine OEM part from INFINITI directly. Depending on your vehicle model and year, the replacement process can vary a bit. In most cases, all you need is the correct fasteners, a screwdriver, and your vehicle owner's manual.

You'll start by letting your car cool down. Then, remove the clips and bolts from your current fender shield. If you'll be reusing the same ones, set them aside for a few minutes (usually, it's best to purchase new ones, in case the existing hardware is worn). Dry fit the new Fender Splash Shield (Left, Front) by holding it in place, carefully checking that all rivets and holes line up with the ones in your fender. Once everything is aligned, bolt or snap your new Fender Splash Shield (Left, Front) into place! If you need help, stop by a nearby INFINITI service center.

With a little bit of time and a made-to-fit Fender Splash Shield (Left, Front), you and your INFINITI can get back to your adventures in no time! Purchase your INFINITI fender splash shields and automotive accessories for your INFINITI straight from the source. This part fits your INFINITI G37, INFINITI G37X, or INFINITI Q60. Check out the What This Fits tab for more info.

Fits G37, G37X, Q60