Baffle FR. Baffle Plate Fender.
Fender Splash Shield.

• Located between the fender and the tire
• Helps shield your vehicle from small rocks and other road debris
• Replace when cracked or broken

On your INFINITI, the fender can help in safeguarding your undercarriage and wheels from flying debris, protect nearby people or vehicles from small pebbles that may ricochet off your tires, and protect your vehicle's frame if you're involved in a minor collision.

On quite a few INFINITI models, the fender consists of multiple components, and one of those is the Fender Splash Shield (Right, Front). Specifically, the INFINITI fender splash shield is mounted to the inside of the wheel well, and is situated between the fender and the tire. All fender splash shields are tailor-made for specific fitment within your vehicle: passenger-side front, passenger-side rear, driver-side front, or driver-side rear. These shields are also engineered with respect to the measurements of particular INFINITI models and years.

Because of where they're mounted on your vehicle, your Fender Splash Shield (Right, Front) is your first layer of protection from incoming debris and contamination. For instance, if a truck speeds past your vehicle and kicks a rock up right into your vehicle's wheel well, the Fender Splash Shield (Right, Front) can help prevent the debris from affecting the brakes, headlight or tail light assemblies, or undercarriage. Additionally, this shield can help protect these parts from outside elements, which could slow wear and tear.

Over time, when exposed to moisture, rain, ice, and road salt, your INFINITI Fender Splash Shield (Right, Front) can degrade, which negatively affects its ability to protect your vehicle's complex systems. Plus, it can break or detach if you hit a curb by accident or encounter a pothole. A broken Fender Splash Shield (Right, Front) leaves that side of your vehicle exposed, and it could also create an annoying flapping or grinding noise if a piece breaks off and flutters up against a tire.

But, the good news is that replacing any of your vehicle's fender splash shields is affordable and easy to handle. You need a Fender Splash Shield (Right, Front) that attaches to your INFINITI seamlessly, so it's wise to buy an authentic part from INFINITI Parts. Depending on your specific vehicle, the replacement process may vary slightly. In most cases, you'll need a screwdriver, fasteners, and your INFINITI owner's manual.

You'll start by giving your car a few minutes to cool. Then, take off the clips and bolts that hold the old fender shield. If you plan to reuse the old bolts and clips, set these small pieces aside (usually, it's advisable to purchase new fastening pieces, in case your old hardware has been damaged). To test the fit of your new Fender Splash Shield (Right, Front), set it inside your wheel well, ensuring any rivets and holes line up with the ones in your fender. After you've aligned everything, bolt or snap the replacement Fender Splash Shield (Right, Front) onto your INFINITI! For professional installation, stop by a nearby INFINITI service center.

With a little bit of time and an OEM replacement Fender Splash Shield (Right, Front), your beloved INFINITI can be back up to speed in no time! Buy top-quality INFINITI fender splash shields and other Body, Interior and Trim parts for your vehicle now. This part will fit your INFINITI G37, INFINITI G37X, or INFINITI Q60. See the What This Fits link for additional details.

Fits G37, G37X, Q60