Local Pick-Up Only.
Protector FR.
Fender Splash Shield.

• Located between the fender and the tire
• Helps shield your vehicle from small rocks and other road debris
• Replace when cracked or broken

On your INFINITI, the fender can help in safeguarding your wheels and undercarriage from incoming road debris, shield nearby people or other vehicles from small pebbles that might deflect from your spinning tires, and protect your vehicle's frame in the event of a collision or "fender bender."

On quite a few INFINITI models, the fender consists of several distinct parts, one of which is the Fender Splash Shield (Left, Front). To get more specific, the INFINITI fender splash shield can be found to the inside of the wheel well, and sits between your tire and the rest of the fender. Fender splash shields are made-to-fit for specific fitment within your car: passenger-side front, passenger-side rear, driver-side front, or driver-side rear. They're also designed for use in specific INFINITI years and models.

Because of where they're mounted in the wheel well, the Fender Splash Shield (Left, Front) serves as your first line of defense from incoming debris and contamination. For instance, if a truck drives past your car and its tires send a rock into your wheel well, your trusty Fender Splash Shield (Left, Front) helps prevent the object from affecting the undercarriage, brake system, or headlight assembly. And, the Fender Splash Shield (Left, Front) may offer protection for those parts from the elements, which can help prevent premature corrosion and wear.

Over time, when exposed to moisture, rain, ice, and road salt, your INFINITI Fender Splash Shield (Left, Front) can break down, which compromises the level of protection it can give to the undercarriage of your vehicle. Keep in mind, it may also break or detach if you scrape a curb or encounter a sizable pothole. If it's broken, your Fender Splash Shield (Left, Front) exposes your vehicle to dangerous debris, and it will probably make a flapping or grinding noise if a broken piece is pushed against the nearby tire.

Here's the thing, though: installing a replacement for your vehicle's fender splash shields is affordable and easy to handle. You'll need a replacement Fender Splash Shield (Left, Front) that will fit on your INFINITI seamlessly, so it's wise to purchase a genuine OEM part from INFINITI directly. Depending on your vehicle model and year, the process of installing your new part may vary slightly. Most of the time, all you need is the correct fasteners, a screwdriver, and your vehicle owner's manual.

Begin by letting your car cool down. Then, take off the bolts and clips that are attached to your current fender shield. If you plan to reuse the old bolts and clips, set these small pieces aside (typically, it's better to go ahead and buy new fasteners, in case the existing hardware is worn). To test the fit of your new Fender Splash Shield (Left, Front), set it inside your wheel well, checking to be sure that all rivets and holes are aligned with the notches and holes in the fender piece. After you've aligned everything, screw or clip your new Fender Splash Shield (Left, Front) into place! For help with this process, head to a local INFINITI retailer or authorized service center.

With a few tools and a made-to-fit Fender Splash Shield (Left, Front), you and your INFINITI can be back up to speed in no time! Buy top-quality INFINITI fender splash shields and automotive accessories for your vehicle now. This part will fit your INFINITI Q60. Check out the What This Fits section to learn more.

Fits Q60